Nissho Pacific Corp. v. United States

Newman, Judge: This case concerns the determination of the proper tariff classification of certain items described on the invoice as “Wire Hope Clamps,” which were imported from Japan through the port of San Francisco. The merchandise was assessed with duty at the rate of 19 per centum ad valorem under the provision in item 657.20 of the Tariff Schedules of the United States (TSUS) for “other” [458] articles of iron or steel, not coated or plated with precious metal. Plaintiff claims that the articles are properly dutiable at the rate of 10.5 per centum ad valorem under item 649.37, TSXJS, as clamps. We hold that the classification of the collector of customs was correct. The Statutes The pertinent provisions of the tariff schedules are: Classified under: Schedule 6, part 3, subpart G: Articles of iron or steel, not coated or plated with precious metal: Other articles: i\t * * * * * * .657.20 Other_ 19% ad val. Claimed under: Schedule 6, part 3, subpart E: 649.37 Vises and clamps (except parts of, or accessories for, machine tools)_ 10.5% ad val. Other provisions: Schedule 6, part 3, subpart E, headnote 1: 1. Except for blow and other torches (items 649.31 and 649.32), abrasive wheels mounted on frameworks (item 649.39), tool tips and forms for making tool tips (item 649.53), sewing sets, pedicure or manicure sets, or combinations thereof (items 651.11 and 651.13), and except for knives, forks, spoons, and ladles, all the foregoing which are kitchen or table ware of precious metal, this subpart covers only articles with a blade, working edge, working-surface or other working part of— iji # * # # # Schedule 6, part 3, subpart G, headnote 1: 1. This subpart covers only articles of metal which are not more specifically provided for elsewhere in the tariff schedules. The Issue The issue to be resolved, then, is whether the articles are specifically provided for eo nomine as clamps under item 649.37, TSUS. Tina NecoRD At the trial, one witness testified on behalf of plaintiff, and one witness was called by defendant. Additionally, a rather large number of [459] exhibits were introduced by each party, viz: eleven exhibits by plaintiff, and seven exhibits by the Government. Plaintiff’s witness was Edwin O. Lorentzen, sales manager for West Coast Wire Nope & Rigging Co., Inc., a purchaser of wire rope clips from the plaintiff importer, for resale to the marine, construction, and industrial trade. Defendant’s witness was Clifford E. Moffet, president of C. E. Mof-fet Company, and a longtime manufacturers’ representative for the sale of wire rope and wire rope fittings, including wire rope clips. The evidence establishes beyond peradventure of doubt that the imported articles are known in the trade as “wire rope clips,” although Federal specifications refer to them as “wire rope clamps.” A wire rope clip is comprised of a U-bolt threaded at the two ends, a saddle and two nuts, and is intended to be used to bind or fasten a wire rope to itself for the formation of a loop or eye at the end. In that process, the U-bolt portion of the clip is placed against the dead end of the wire rope, the saddle secures it against the live end of the rope, and the two nuts are then tightened in place under the saddle. The objective in using the clips is to hold the two pieces of wire rope together in a “fast” manner, and one or more clips may be used to do so. Wire rope clips are generally used in rigging, construction and industrial work in conjunction with wire rope. SUMMARY OK ARGUMENTS Plaintiff contends that the wire rope clips fall within the common meaning of the term “clamps,” in that they are devices operated by a screw movement for holding and binding things together; and that wire rope clips are within the eo nomine provision for clamps inasmuch as an eo nomine designation of an article, without limitation or a contrary legislative intent, includes all forms of the article. Defendant insists upon a restrictive interpretation of the term “clamps,” and argues that such provision is applicable only to work-holding devices, as those used by carpenters, watchmakers, or gunsmiths. Additionally, defendant urges that Congress did not intend to include under one heading of the tariff schedules all devices which hold fast or bind things together. The Law Although not cited in the briefs of either party, headnote 1 of Schedule 6, Part 3, Subpart E, TSUS, appears to dispose of plaintiff’s claim. Respecting the tariff schedules, it would seem elementary that in ascertaining the legislative intent or scope of a provision, the primary source [460] to be consulted is any relevant interpretive beadnote, which Congress provided for such purpose.1 Headnote 1 of subpaf t E, so far as is pertinent states: * * * this subpart [E] covers only articles with a blade, working edge, working surface or other working part * * * In light of the foregoing interpretive headnote, the common meaning of the term “clamps” must in any event yield to the expressed legislative intent. Similarly, the general rule that eo nomine designations embrace all forms of the named article does not help plaintiff’s position, since the headnote clearly evinces a “limitation” and “contrary legislative intent.” Hence, whether or not the wire rope clips fall within the common meaning of the term “clamp,” we find that the clips are excluded from classification under item 649.37, TSUS, since the exhibits and testimony show they did not possess a “blade, working edge, working surface or other working part.” Although legislative history is usually resorted to for the purpose of resolving ambiguity, it may be studied to ascertain whether a literal interpretation conflicts with the intent of Congress, or whether certain words are employed with a meaning different from that usually given to them. Pacific Suppliers, Ltd., et al. v. United States, 62 Cust. Ct. 517, C.D. 3819, 299 F. Supp. 1134 (1969). This court on many occasions has made reference to the Brussels Nomenclature and the explanatory notes thereto as a source of legislative history for the TSUS. See W. R. Filbin & Co., Inc. v. United States, 63 Cust. Ct. 200, C.D. 3897 (1969), for an exhaustive discussion of this subject. In the present case, it clearly appears from headnote 1 of subpart E that a literal interpretation of the term “clamps” in item 649.37 would conflict with the intent of Congress. Moreover, the restrictive interpretation of the term “clamps” urged by defendant is buttressed by the explanatory notes to the Brussels Nomenclature (volmne 2, page 743), which limit the provision for clamps in heading 82.04 of Brussels to those which “like vices, serve as holding tools.” In this connection, we note that the language of item 649.37, TSUS is, for all practical purposes, identical to the following pertinent language in heading 82.04 of the Brussels Nomenclature: * * * vices and clamps, other than accessories for, and parts of, machine tools * * *. This highly significant fact warrants the conclusion that item 649.37 was adopted from the Brussels Nomenclature, particularly in view of the fact that there was no comparable provision for clamps in the [461] Tariff Act of 1930. Also, we have observed that, notwithstanding the provision for clamps in heading 82.04 of the Brussels Nomenclature, the explanatory notes (volume 2, page 688) indicate that certain types of clamping devices are classifiable under heading 73.40 providing for “Other articles of iron or steel,” which is comparable to item 657.20, TSUS. Finally, it has been held that whether or not a given term in a tariff statute is used in an ambiguous manner must be determined not from the literal meaning of the term, but from the connection in which it is used, and a consideration of the entire statute in which the term is found. Charles Hardy, Inc. v. United States, 21 CCPA 173, T.D. 46509 (1933). Following that rule, an analysis of all of the provisions in subpart E covering various tools (including anvils and vises) convinces us that the only clamps which Congress intended for classification in item 649.37 'are those which, like vises, serve as holding tools— those which hold the articles while work is being performed on the articles. For a description of some of the types of “work holder” clamps used in industry see Summaries of Trade and Tariff Information (1968), Schedule 6, Volume 6, page 96. Patently, the wire rope clips are not work holding tools. In view of the foregoing considerations, we find and hold that the wire rope clips were properly assessed with duty at the rate of 19 per centum ad valorem as “other” articles of iron or steel, not coated or plated with precious metal, under item 657.20, TSUS. Judgment will be rendered accordingly. Footnotes [1] The importance of the interpretive headnotes in the tariff schedules is pointed up by the Tariff Glassification Study Submitting Report (page 9) prepared for use of the President and the Congress pursuant to Title I of the Customs Simplification Act of 1954.