All Tools, Inc. v. United States

OPINION EATON, Judge; This matter is before the court on defendant’s motion for summary judgment based on a claimed lack of subject-matter jurisdiction. By its motion, defendant alleges that plaintiff, All Tools, Inc. (“All Tools”), failed to file timely its summons pursuant to 28 U.S.C. § 2636(a)(1) (2006), and therefore failed to establish jurisdiction before this Court. Def.’s Mem. in Support of Mot. for Summ. J. (“Def.’s Mem.”) 1. All Tools argues that the deadline for filing its suit was equitably tolled pending Customs’ issuance of a protest number, and therefore its suit is timely. Pl.’s Mem. in Opp. to Mot. for Summ. J. (“Pl.’s Mem.”) 1. Because some of the Counts in the Complaint were untimely filed, and others raise issues not found in a timely protest, the court grants defendant’s motion for summary judgment and dismisses the case. *1319 BACKGROUND Summary judgment is appropriate when there are no genuine issues of material fact and the moving party is entitled to judgment in its favor as a matter of law. USCIT R. 56(c). Here, none of the material facts are in dispute. On August 26, 2003, All Tools, through its customs broker, Mr. Pedro Carmona, entered a shipment of Chinese-origin painting accessories through the Port of San Juan, Puerto Rico. Def.’s Mem. Ex. 1. Mr. Carmona completed the entry summary for the merchandise, stating that the entry included paint brushes classified under HTSUS No. 9603.40.4040 as “Natural Bristle Brushes.” Def.’s Mem. Ex. 1. Mr. Carmona was listed on the entry summary as the importer of record. Def.’s Mem. Ex. 1. Following the filing of the entry summary, Customs concluded that, because the paint brushes had natural bristles, they fell within an-tidumping duty order No. A570-501-000, and therefore were subject to an unfair trade duty of 351.92 percent. Def.’s Mem. Ex. 2; see Natural Bristle Paint Brushes and Brush Heads from the People’s Republic of China, 61 Fed. Reg. 52,917 (Dep’t of Commerce Oct. 9, 1996) (final results). On January 8, 2004, Customs sent an Informed Compliance Notice addressed to Mr. Carmona, care of All Tools, stating that the paint brushes were subject to this antidumping duty. Def.’s Mem. Ex. 2. The Informed Compliance Notice also directed All Tools’ attention to a Customs Notice (Notice No. 2001-01 of Oct. 4, 2001) regarding the filing of non-reimbursement statements for entries subject to antidumping duties. Def.’s Mem. Ex. 2. The purpose of a non-reimbursement statement is to assure Customs that the importer will not be repaid the antidumping duty by the exporter or producer of the merchandise. 19 C.F.R. § 351.402(f)(l)-(2) (2009). If an importer fails to file a non-reimbursement statement, Commerce may presume that the exporter or purchaser did, in fact, reimburse the importer for the antidumping duties paid. 19 C.F.R. § 351.402(f)(3). In cases where Commerce relies on this presumption, it will treat the duty as if it had been fully reimbursed, and will charge the importer the duty a second time; in effect doubling the duty rate. See Id. All Tools did not file a non-reimbursement statement until February 17, 2006. Def.’s Mem. Ex. 11. On September 13, 2004, having heard nothing from either Mr. Carmona or All Tools, Customs sent a Notice of Action to Mr. Car-mona advising that “dumping duties of 703.84% [were to] be assessed” on the entry as a non-reimbursement statement had not been *1320 filed. Def.’s Mem. Ex. 5; see 19 C.F.R. § 152.2. Neither Mr. Carmona nor All Tools responded to the Notice of Action. Customs liquidated the entry on October 15, 2004 and assessed the double duty rate. Def.’s Mem. Ex. 6. On January 14, 2005, 91 days after the liquidation of All Tools’ entry, Mr. Carmona filed a protest ¿gainst liquidation on the company’s behalf, contesting the classification of the entry. 1 Def.’s Mem. Ex. 7 (“Protest No. 1”). By seeking to have its merchandise classified as being made of synthetic bristles, All Tools was endeavoring to keep its merchandise from being subject to antidumping duties. Customs denied Protest No. 1 as untimely on January 18, 2005, stating that it was not filed within ninety days of the liquidation. Def.’s Mem. Ex. 8; see 19 U.S.C. § 1514(c)(3)(A) (2000). 2 Pursuant to 19 U.S.C. § 1514(a), an appeal of the denial of Protest No. 1 could have been taken within 180 days of January 18, 2005. All Tools did not appeal the denial of Protest No. 1 to this Court. On September 2, 2005, Mr. Carmona filed a claim with Customs pursuant to 19 U.S.C. § 1520(c)(1) 3 alleging a mistake of fact. Def.’s Mem. Ex. 9 (“Carmona Letter”). The basis for Mr. Carmona’s claim was that the “Informed Compliance Notice [and the] Notice of Action . . . treated Carmona as the ‘importer’ when, in fact, All Tools was the ‘importer.’” Carmona Letter 2. Customs denied Mr. Carmona’s claim on January 5, 2006, stating that the circumstances “[did] not constitute clerical error, mistake of fact or other inadvertence.” Def.’s Mem. Ex. 10. *1321 On March 17, 2006, All Tools filed a protest with Customs to contest the denial of Mr. Carmona’s § 1520(c)(1) mistake of fact claim. 4 Def.’s Mem. Ex. 11 (“Protest No. 2”). On April 5, 2006, Customs denied Protest No. 2. Def.’s Mem. Ex. 12. Following the denial of the protest, counsel for All Tools asked Customs to assign a protest number to Protest No. 2 on four occasions beginning on April 13, 2006, eight days after Customs denied All Tools’protest as untimely, and ending on February 20, 2007. Pl.’s Exs. B, C, D, E. Customs assigned a protest number on February 20, 2007, but has given no reason for its failure to assign a number at an earlier date. Pl.’s Mem. 2. All Tools commenced this suit on July 3, 2007, 133 days after receiving the protest number, seeking: (1) an order reclassifying its merchandise (“Count I”); (2) an order “that the dumping duties cannot be doubled in this case” (“Count II”); (3) the reliquidation of its merchandise at the “at entered” rate because deemed liquidation had occurred on August 26, 2004 (“Count III”); and (4) an order “approving” Protest No. 2 and ordering Customs to refund the duties (“Count IV”). All Tools, Inc. v. United States, Court No. 07-00237, Summons (July 3, 2007); All Tools, Inc. v. United States, Court No. 07-00237, Complaint (Apr. 2, 2008). Prior to filing its summons, All Tools paid the duties owed on the entry as required by 28 U.S.C. § 2637(a). 5 Pl.’s Resp. To June 29, 2010 Letter 1. The summons was filed some 896 days after the denial of Protest No. 1, and 274 days after the statutorily-prescribed time for appealing the denial of Protest No. 2. See 19 U.S.C. § 1514(a). Defendant filed its motion for summary judgment on September 30, 2009. Oral argument was held on April 8, 2010, after which the court ordered additional briefing on a number of issues concerning the § 1520(c)(1) mistake of fact claim. All Tools, Inc. v. United States, Court No. 07-00237 (Apr. 12, 2010) (order for additional briefing). On June 29, 2010, the court sent a letter to the parties requesting information as to the status of Mr. Carmona’s interest in the matter. All Tools, Inc. v. United States, Court No. 07-00237 (June 29, 2010) (letter to parties regarding Mr. Carmona). *1322 Plaintiff asserts that this Court has jurisdiction to hear its claims pursuant to 28 U.S.C. § 1581(a). Pl.’s Mem. 6. Under 28 U.S.C. § 1581(a), the United States Court of International Trade has “exclusive jurisdiction of any civil action commenced to contest the denial of a protest, in whole or in part . . . .” STANDARD OF REVIEW The defendant’s motion for summary judgment is based on its assertion that the court does not have jurisdiction over the Counts of All Tools’ complaint. “A jurisdictional challenge to the court’s consideration of [pjlaintiff’s action raises a threshold inquiry.” Hartford Fire Ins. Co. v. United States, 31 CIT 1281, 1285, 507 F. Supp. 2d 1331, 1334 (2007) (citations omitted). Thus, before reaching the merits of plaintiff’s Complaint, the court must rule on defendant’s motion for summary judgment. “The party seeking to invoke this Court’s jurisdiction has the burden of establishing such jurisdiction.” Autoalliance Int’l, Inc. v. United States, 29 CIT 1082, 1088, 398 F. Supp. 2d 1326, 1332 (2005) (citations omitted). To avoid dismissal, a plaintiff “must allege in his pleading the facts essential to show jurisdiction.” McNutt v. Gen. Motors Acceptance Corp., 298 U.S. 178, 189 (1936). DISCUSSION The United States, on behalf of Customs, has moved for summary judgment on the basis that All Tools failed to file timely its summons pursuant to 28 U.S.C. § 2636(a)(1). 6 Such timely filing is a prerequisite for the commencement of an action before this Court under 28 U.S.C. § 1581(a). See AutoAlliance Int’l, Inc. v. United States, 26 CIT 1316, 1323, 240 F. Supp. 2d 1315, 1322 (2002) (finding that plaintiff’s suit was barred because plaintiff failed to file a summons in this Court within 180 days after Customs’ ruling on the protests). All Tools opposes the motion for summary judgment, but does not dispute any of the jurisdictional facts. Rather, All Tools insists that its lawsuit was timely commenced because the deadline for filing the summons was equitably tolled until Customs issued a protest number for Protest No. 2. The court finds that All Tools’ complaint must be dismissed for the following reasons. *1323 I. The Classification and Antidumping Duty Claim Plaintiff’s primary purpose in filing this suit is to gain review of the classification of the paint brushes in its entry. This is because if All Tools is successful in challenging the classification, it will be able to place its merchandise outside of the antidumping duty order, and thus keep it from being subject to antidumping duties. As noted, All Tools’ protest of the classification of its merchandise (Protest No. 1) was filed on January 14, 2005, ninety-one days after its October 15, 2004 liquidation. Customs denied Protest No. 1 as untimely under 19 U.S.C. § 1514(a), stating that it was filed one day late. Def.’s Mem. Ex. 8; see Def.’s Mem. Ex. 12 (referring to this protest as protest no. 490905200003). To contest the finding that Protest No. 1 was untimely filed, and thus to contest the classification of the paint brushes and the resulting antidumping duties, All Tools was required to file suit in this Court by July 18, 2005. 28 U.S.C. § 2636(a)(1) (“A civil action contesting the denial, in whole or in part, of a protest... is barred unless commenced . . . within one hundred and eighty days after the date of mailing of notice of denial of a protest. . . .”). All Tools never sought judicial review of Protest No. 1. All Tools makes no claim that the time to file suit contesting the denial of Protest No. 1 was tolled. Because All Tools did not file its lawsuit within 180 days of the denial of Protest No. 1, the liquidation of the entry under HTSUS No. 9603.40.4040 as “Natural Bristle Brushes” became final and conclusive as of July 18, 2005. 19 U.S.C. § 1514(a) 7 . Therefore, All Tools is foreclosed from further contesting: (1) the paint brushes’ classification; and (2) the application of antidump-ing duties resulting from such classification. 8 See 28 U.S.C. § 2636(a)(1). As a result, the claim for refunding antidumping duties based on a misclassification of All Tools merchandise contained in Count I of the complaint is dismissed. II. The Mistake of Fact Claim On January 8, 2004, Mr. Carmona was sent the Informed Compliance Notice, care of All Tools, stating that the company’s merchandise *1324 was subject to the antidumping duties, and further saying “[i]nsure that you abide by Notice No. 2001-01 of 10/04/01 regarding reimbursement statement.” Def.’s Mem. Ex. 2. Thereafter, Mr. Carmona received the Notice of Action, dated September 13, 2004, informing All Tools that the double duty was to be assessed on the merchandise and that the entry was in the process of being liquidated. As noted, the entry was liquidated on October 15, 2004, and the double duties were assessed at that time. On September 2, 2005, Mr. Carmona filed a mistake of fact claim with Customs pursuant to 19 U.S.C. § 1520(c)(1). Def.’s Mem. Ex. 9. The alleged mistake of fact was that the “Informed Compliance Notice [and the] Notice of Action . . . treated Carmona as the ‘importer’ when in fact All Tools was the ‘importer.’” Carmona Letter 2. In other words, the mistake of fact alleged by Mr. Carmona was that he was being treated as the importer of the merchandise, rather than All Tools, for the purposes of filing the non-reimbursement statement. The Carmona Letter did not challenge the application of the anti-dumping duty to All Tools’ entry and, while it did take issue with the doubling of the duty because Mr. Carmona was incapable of filling out the non-reimbursement statement, it did not assert that the imposition of the double duty was a mistake of fact. That is, the mistake of fact asserted in the letter was that Mr. Carmona was wrongly treated as the entry’s importer for purposes of filing the non-reimbursement statement. Under the then-existing law, a mistake of fact claim could have been made to Customs up to one year after liquidation and still be timely. See 19 U.S.C. § 1514(a). Thus, Mr. Carmona’s claim appears to have been timely. On January 5, 2006, Customs denied Mr. Carmona’s claim by stating that the allegations in his letter did “not constitute clerical error, mistake of fact or other inadvertence” and therefore did not fall within the bounds of 19 U.S.C. § 1520(c)(1). Def.’s Mem. Ex. 10. On March 17, 2006, All Tools filed a protest of Custom’s denial of Mr. Carmona’s § 1520(c)(1) mistake of fact claim. Def.’s Mem. Ex. 11 (“Protest No. 2”). In Protest No. 2, All Tools reiterated its claim that Mr. Carmona could not file the non-reimbursement statement. Def.’s Mem. Ex. 11. Count II of the complaint addresses the claimed mistake of fact. At paragraphs 22 through 24 of the complaint, All Tools alleges that Mr. Carmona “could not file an anti-reimbursement (sic) statement as he was not privy to the transaction between the exporter and the importer.” Compl. ¶ 23. *1325 On February 17, 2006, 490 days after its merchandise was liquidated, All Tools filed a non-reimbursement statement. Def.’s Mem. Ex. 11. Based on the claimed mistake that the Informed Compliance Notice wrongly instructed Mr. Carmona to -file the non-reimbursement statement, All Tools’ Count II apparently asks the court to direct Commerce to accept its late filed non-reimbursement statement, rescind the doubling of the antidumping duty, and reli-quidate the entry at the 351.92 percent rate. “Wherefore, the plaintiff respectfully requests the Court to enter an order that the dumping duties in this case cannot be doubled and that half of the dumping duties that have been paid be refunded with interest.” Compl. ¶ 24. In order for plaintiff to have the allegations contained in Count II heard, however, its case must have been timely filed. Plaintiff argues that the court has jurisdiction over this matter because the deadline for filing the summons was equitably tolled until the company received a protest number for Protest No. 2. Thus, according to plaintiff, it was excused by defendant’s actions from filing its summons by October 2, 2006, 180 days after Protest No. 2 was denied, and had until 180 days after February 20, 2009, when it received the protest number, to bring suit contesting Protest No. 2. Plaintiff cites DaimlerChrysler Corp. v. United States for the proposition that a protest number was required for it to file its lawsuit contesting the denial of a protest. 442 F.3d 1313 (Fed. Cir. 2006) (‘DaimlerChrysler”). In DaimlerChrysler, plaintiff timely filed various suits contesting the denial of protests relating to the duties on “sheet metal [exported] to Mexico for painting and assembly into motor vehicles, and then imported the vehicles into the United States.” On its summons plaintiff listed some but not all of its protests by protest number. Id. at 1315 (“The schedule omitted seven protests covering more than 400 entries . . ..”). Plaintiff later moved to amend its complaint to include the entries covered by the protests for which it had omitted the numbers, but the motion was denied. In affirming the Court of International Trade, the Federal Circuit found that “[t]he essential jurisdictional fact-the denial of the protest-simply cannot be affirmatively alleged without specifically identifying each protest involved in the suit.” Id. at 1319; see id. at 1321-22 (“[A] summons can provide fair notice only if the contested protests are identified with particularity. . . . Daimler failed to identify the seven protests in the summons. The summons was therefore insufficient to ‘commence an action’ in the Court of International Trade as to the seven omitted protests within the 180-day limitation period.”). Plaintiff’s reliance on DaimlerChrysler is misplaced. This is because the case does not hold that the inclusion of a protest number is *1326 a prerequisite for the filing of a summons. Rather, it stands for the proposition that “a summons can provide fair notice only if the contested protests are identified with particularity.” Id. at 1321. In keeping with this holding, this Court has held that the inclusion of a protest number is not necessary to commence a lawsuit contesting a protest denial and that identification by other means such as an entry number is sufficient to meet filing requirements. See Int’l Custom Prods., Inc. v. United States, 32 CIT _, _, Slip Op. 08-53 at 2, n.3 (May 20, 2008) (not reported in the Federal Supplement); see also, DaimlerChrysler v. United States, 28 CIT 2105, 2106—07, 350 F. Supp. 2d 1339, 1341 (2004) (holding that “if the entries were listed and it was possible for the United States to relate the entry to the protest, . . . then jurisdiction would also attach”). DaimlerChrysler involved eighty-one protests and hundreds of entries. 442 F.3d at 1316. Here, as has been seen, the sole entry at issue was subject to two protests. Plaintiff’s lawsuit seeks to contest Protest No. 2. Plaintiff insists that because it had no protest number for Protest No. 2, it was prohibited from filing its summons under the holding of DaimlerChrysler. There is little question, however, that if All Tools had filed a summons listing the entry number and the date that Protest No. 2 was denied, Customs would have received sufficient notice as to the company’s claim and grounds upon which it rested. There are, no doubt, other ways that plaintiff could have identified the protest it was disputing and thus have given defendant sufficient notice for plaintiff to commence the suit. Thus, All Tools was not prevented from filing this action by Customs’ failure to assign a protest number. With this in mind, the court turns to plaintiff’s equitable tolling argument itself. Equitable tolling is generally limited to situations either where a claimant “has been ‘induced or tricked by his adversary’s misconduct into allowing the filing deadline to pass’” or “where a claimant has actively pursued judicial relief by filing a defective pleading within the statutory time period . . . .” Former Emps. of Siemens Info. Commc’n Networks, Inc. v. Herman, 24 CIT 1201, 1208, 120 F. Supp. 2d 1107, 1114 (2000) (quoting Irwin v. Dep’t of Veterans Affairs, 498 U.S. 89, 96 (1990) (“Irwin”)). In order to assert equitable tolling, the party claiming it must show that it has been diligent in preserving its legal rights. See Irwin, 498 U.S. at 96 (“We have generally been much less forgiving in receiving late filings where the claimaint failed to exercise due diligence in preserving his legal rights.”). Because All Tools was not prevented from filing its case, either by defendant inaction or otherwise, equitable tolling is not available to it. Here, while it is clear that Customs failed in its duty to supply the *1327 protest number, it is equally clear that, because All Tools could have filed its lawsuit, it was not induced by Customs’ misconduct “into allowing the filing deadline to pass” and, as a result, the filing deadline was not tolled. That is, the plaintiff, who was represented by counsel, was not prevented by Customs’ failure to supply the protest number from filing its suit. Thus, plaintiff has simply not made out a case that the filing deadline should be tolled based on Customs’ behavior. Nor can it be said that plaintiff can be found to have demonstrated such diligence as to justify equitable tolling. “Courts have found due diligence where a party made reasonable and sustained attempts to resolve questions or ambiguities and reasonably attempted to comply with the statutory time limits.” North Dakota Wheat Comm’n v. United States, 28 CIT 1236, 1244, 342 F. Supp. 2d 1319, 1326 (2004) (citing Former Emps. of Quality Fabricating, Inc. v. U.S. Sec’y of Labor, 27 CIT 419, 424, 259 F. Supp. 2d 1282, 1286 (2003) (holding that plaintiff showed due diligence where plaintiff continuously emailed Department of Labor regional office, checked the Department of Labor website daily and visited the State of Pennsylvania Department of Labor Trade Adjustment Representative, yet was not informed she was consulting the wrong sources of information)). As evidence of its diligence, All Tools notes that its counsel asked Customs to assign a protest number to Protest No. 2 on four occasions. Pl.’s Mem. Exs. B, C, D, E. Commerce finally assigned a protest number on February 20, 2007. Pl.’s Mem. 2. For purposes of demonstrating due diligence, however, All Tools’ efforts are unconvincing. This is because the company made but one request for a protest number prior to the time the statute of limitations had run its course. All Tools made this single request for a protest number on April 13, 2006, shortly after the protest had been denied, and then took no further action until December 21, 2006, well past the 180-day period for bringing suit before this Court. This falls short of the “repeated and sustained” attempts envisioned by the court in Former Employees of Quality Fabricating and, as such, All Tools did not make the necessary effort required to demonstrate the exercise of due diligence. In addition, once the protest number was in hand, All Tools did not act in a diligent fashion to commence its suit. Rather, it waited 133 days before filing its summons. A claim that equitable tolling should be applied to a deadline to file suit against the government faces a high threshold, and the plaintiff must affirmatively show that either the actions of the government “induced or tricked” the plaintiff into filing its lawsuit after the deadline, or that the plaintiff has diligently attempted to preserve its legal rights, but did not meet the required deadline. All Tools has *1328 failed to meet either of these requirements. As such, the complaint contesting Protest 2 was filed late, and the court does not have jurisdiction over it. See 28 U.S.C. § 2636(a). Count II of the complaint is therefore dismissed. III. The Deemed Liquidation Claim Next, by Count III of the complaint, All Tools insists that its entry was liquidated “by operation of law” pursuant to 19 U.S.C. § 1504(a), prior to the actual liquidation on August 26, 2004. As has been noted, however, plaintiff seeks to invoke this Court’s jurisdiction pursuant to 19 U.S.C. § 1581(a). In order for the court to have jurisdiction over a claim under § 1581(a), a challenged decision by Customs must appear in a valid protest. See,, e.g., Novell Inc. v. United States, 21 CIT 1141, 1142, 985 F. Supp. 121, 123 (1997) (holding that this Court’s jurisdiction under 28 U.S.C. § 1581(a) is limited to those civil actions that contest the denial, either in whole or in part, of a protest). All Tools’ deemed liquidation claim is raised for the first time in its complaint, and thus does not appear in a protest that Customs has denied. Therefore, the court does not have jurisdiction under 19 U.S.C. § 1581(a) to hear All Tools’ claim. As such, Count III of the complaint is dismissed. IV. The Claim That The Court Should Approve Protest No. 2 Finally, by Count IV, All Tools seeks an order from the court directing Customs to “approve” Protest No. 2 and “refund the duties with lawful interest.” Compl. ¶ 34. This claim too is based on the theory that All Tools’ complaint, although filed 454 days after Protest No. 2 was denied, is nonetheless timely, based on Customs’ failure to assign the plaintiff a protest number. As has been seen, however, Count II of the Complaint, which was based on Mr. Carmona’s mistake of fact claim found in Protest No. 2, has been found to have been untimely filed, and therefore does not provide the basis necessary for subject-matter jurisdiction, and has been dismissed. For the same reasons, Count IV of the complaint is dismissed. CONCLUSION For the foregoing reasons, this case is dismissed. Judgment shall be entered accordingly. Footnotes [1] All Tools contended, in Protest No. 1, that the brushes should have been classified as HTSUS No. 9603.40.40.60 “other paint brushes,” and further that the brushes were made of synthetic filaments, and therefore not subject to the antidumping duty order. Def.’s Mem. Ex. 7. [2] Until the 2004 Amendments to the Tariff Act went into effect on December 18, 2004, the time limit for protesting a Customs classification determination was ninety days after notice of liquidation or reliquidation. See Amendments to the Tariff Act of 1930, Pub. L. 108-429, § 1571 (amended 2004). [3] 19 U.S.C. § 1520(c)(1) (2000) was repealed on December 3,2004 (Amendments to Tariff Act of 1930, Pub. L. 108-429, Title II, § 2105 (amended 2004)), but was still in effect as to All Tools’ entry. It stated: Notwithstanding a valid protest was not filed, the Customs Service may, in accordance with regulations prescribed by the Secretary, reliquidate an entry or reconciliation to correct- (1) a clerical error, mistake of fact, or other inadvertence, whether or not resulting from or contained in electronic transmission, not amounting to an error in the construction of a law, adverse to the importer and manifest from the record or established by documentary evidence, in any entry, liquidation, or other customs transaction, when the error, mistake, or inadvertence is brought to the attention of the Customs Service within one year after the date of liquidation or exaction!.] [4] All Tools, as the ultimate consignee, has standing to file a protest “with respect to merchandise that is the subject of a decision specified in [19 U.S.C. § 1514(a)]”. 19 U.S.C. § 1514(c)(2)(A) (2006). [5] As part of his mistake of fact claim, Mr. Carmona stated “it was a mistake of fact for Customs to look to Carmona for payment of antidumping duties and interest and not All Tools.” Carmona Letter 4. Mr. Carmona, however, is not a party to this suit, and both parties agree that, because All Tools paid the duties before commencing suit, his claim is moot. PL’s Reply to June 29 Letter 2 (“Mr. Carmona does not have any interest in this case.”); Def.’s Reply to June 29 Letter 3 (“[i]t is our position that Mr. Carmona has no interest in the outcome of this lawsuit.”). [6] 28 U.S.C. § 2636(a) reads, in part: (a) A civil action contesting the denial, in whole or in part, of a protest under [19 U.S.C. § 1515] is barred unless commenced in accordance with the rules of the Court of International Trade— (1) within one hundred and eighty days after the date of mailing of notice of denial of a protest under [19 U.S.C. §1515(a)] .... [7] Plecisions of the Customs Service, including the legality of all orders and findings entering into the same, as to . . . the classification and rate and amount of duties chargeable ... shall be final and conclusive upon all persons (including the United States and any officer thereof) unless a protest is filed in accordance with this section, or unless a civil action contesting the denial of a protest, in whole or in part, is commenced in the United States Court of International Trade in accordance with chapter 169 of title 28 within the time prescribed by section 2636 of that title. 19 U.S.C. § 1514(a). [8] Protest No. 1 made no mention of the doubling of the antidumping duties as it sought to challenge the classification of the merchandise and remove it from any antidumping duty liabilities.