Sharp v. Riessner

Mr. Justice Blatchford delivered the opinion of the court. This is a suit in equity brought for the alleged infringement of letters-patent No. 177,334, granted to Abner B. Hutchins, May 16th, 1876, for an improvement in hydro-carbon stoves. The specification and drawings are as follows: “The-object of this invention is to produce a stove which can safely and easily be heated by the combustion of a hydrocarbon or oil in a similar manner to that in common use in illuminating lamps. “ The invention consists of the following devices: The vessel or chamber containing the oil or hydro-carbon is submerged- *632 in water, so as to always keep, the said oil-vessel or chamber cool, and thereby free from explosive or other accident. The water-vessel is covered, with a perforated metal plate, which forms the base of - the hot-air cylinder, on the top of which the- culinary or other vessels to be heated are placed. Yertical tubes or flues are placed in the hot-air cylinder in such ■positions as to act as chimneys for the burners. Mica win- dows are placed in the sides of these flues or chimneys in such positions as to .enable the operator to observe the flame of the burner and to regulate the same as circumstances may require. “ The invention will be readily understood by reference to the accompanying drawings, of which- Figure 1 is partly an elevation and partly a vertical section of the improved stove. Fig. 2 is partly a plan and partly a section of the same. In this view the half of the top-plate only is removed, so as to disclose the construction of the hot-air cylinder and the flues or chimneys. Fig. 3 is a sectional plan of the stove, taken just below the top-plate of the water-chamber, and showing a-part of the top-plate of the oil-vessel or reservoir broken out. “ The base of the stove consists of a vessel, A, resting, for *633 convenience, on short legs a. ■ This vessel is intended to con■tain water, and lias a top plate, A', which is preferably made of cast metal, and strong enough to support all the parts of' the stove which are above it. This plate A' is annular in form if the stove is of general cylindrical construction (which is preferable to other forms), the central opening in the said *634 plate being nearly equal in area to the sectional area of the hot-air cylinder C, which rests upon it. Concentrically arranged around this central opening is a series of perforations, a1, through which atmospheric air passes down into the top part of the vessel A, and thence up through the hot-air cylinder and its chimneys. “ The reservoir or vessel B, in which the oil or hydro-carbon is put for use in this stove, is placed within the vessel A, and the bottom of the vessel A may likewise constitute the support for the bottom of the vessel B, and there will be an intervening chamber, B', between the sides' of the vessel B and its inclosing vessel A, and the sides of the vessel A will extend up one or' two inches (more or less) above the top of the vessel B. While in use the annular chamber B' will be filled with water, and water will also cover the top of the vessel B, which said vessel and its contained fluid will thereby ■be always kept at a low temperature, and accident from the ignition or explosion of the oil or hydro-carbon will thus be rendered impossible by this. water covering. A tube, b, extends from the vessel B up through one of the perforations or apertures a1, and serves as a means of filling the vessel B. A suitable screw-cap closes the top end of this tube. A pipe or valve, a2, leads from the chamber B' to the outside of A, for the purpose of drawing off the -water when it becomes heated, or when the occasion requires it. Water may easily be poured into the vessel A through the apertures a1. “The wick-tubes D are attached to the top of the vessel B, ■and the wick used to conduct the oil from B to the flame is operated in the usual manner of illuminating-lamps. The rollers for moving the wicks up and dowh are inclosed in casings or housings E, and are operated by the thumb-wheels F, the stems f of which pass through tubes W, that are attached tightly to the ends of the housings E, and pass through the side of the vessel A. Care must be taken to have all of the parts of DEE' that lie within the water-way of A 'perfectly water-tight, so as to prevent the leakage of the water either into the vessel B or outside of A. “ The hot-air cylinder C is preferably built of sheet metal, *635 and is binged to its base-plate A' by tbe binge c at tbe backside of tbe stove,- so as to permit tbe top parts of tbe stove to be tipped back ont of tbe way of trimming tbe wicks, or for other purposes. A finely-perforated diaphragm, G-, covers tbe central opening of tbe base-plate A' below tbe hot-air cylinder, for tbe purpose of properly controlhng tbe air-currents that pass up from tbe chamber of A into tbe hot-air cybnder. A diaphragm, H, within tbe hot-air cylinder C, and near its base, is fixed, by riveting or otherwise, to the sides of tbe said cylinder. Portions of this diaphragm are formed into conical flame-caps, A, for controlhng and confining tbe flame within its proper hmits in a manner similar to that in common use in illuminating-lamps. “ Above tbe diaphragms H tubes or chimneys I confine the hot gases and products of combustion from tbe flames of tbe burners within proper limits for the efficient action of tbe burners. These tubes or chimneys I extend from tbe diaphragm H to the top of tbe hot-air cylinder, and are preferably made of sheet metal. Tbe shell of tbe hot-air cylinder C forms one side of each of these chimneys,- and in this side, which is common to both the cybnder and the chimney, a small mica window, X, is placed, so as to enable the operator, from without, to see and regulate the flame of-the burners by turning the thumb-wheel F, as required. For simplicity of construction I cut apertures in the side of the hot-air cybnder, suitable for the windows K, and through these apertures portions of the metal of the chimney-plates are extended, which said portions are bent over in the form of grooves A, as' in Figs. 1 and 2, for the reception of the mica plates that are to form the windows. “ The top of the hot-air cybnder is covered with a cast-metal plate, L, that serves as a rest for whatever vessel is to be heated on this stove. The plate L is perforated with apertures over the chimneys, and also over the hot-wells of the cybnder C, as web as in the portions lying outside of the cybnder, thus permitting ab of the heat generated to reach the vessel on top of the plate L, and thereby be utibzed. The intense heat imparted to the plates of the chimneys I and *636 plate L, apd reflected thence back upon the hot gases passing through and about these parts, will be quite sufficient to consume all oí the smoke, and there will, in consequence, be no emission of unpleasant odors from imperfect combustion. The top surface of the plate L is provided with ridges l, that keep the vessels placed thereon from obstructing the openings in the said plate.” The claims are these: “ 1. The water-vessel A, with its perforated top plate A' and hot-air cylinder C, hinged at o to plate A', and top perforated plate L, all arranged and connected together substantially as and for the purpose set forth. “ 2. The chimneys I, having one of their sides formed by the hot-air cylinder C, to which they are connected by the. groove-clips h, that also receive the mica windows K, as and' for the purpose set forth.” It is. contended that the defendants infringe the first claim. The Circuit Court dismissed the bill, 15 Fed. Hep. 919, holding that there was. no infringement. The plaintiff has appealed. One of the elements in the first claim is the “ perforated top-plate A',” being the top-plate to the water-vessel A. It is described as annular in form, if the stove is cylindrical, with a central opening. The specification then says: “ Concentrically arranged around this central- opening is. a series of perforations, a1, through which atmospheric air passes down into the top part of the- vessel A, and thence up through the hot-air .cylinder and its chimneys.” In the defendants’ stove the hot-air. cylinder rests on three equidistant struts, which extend from the base of the cylinder to the wall of the water-chamber, and thus the weight of the cylinder and of the utensils upon it is thrown against such wall instead of on the bottom of the water-chamber. Of course, -there is an open space between every two of the struts, through which spaces air passes freely. The Circuit Court held that the arrangement of the three struts was not the plaintiffs perforated top-plate A', because the. struts did not perform- the office which required the plate with perforations, that office being, as de *637 scribed in tbe specification, to canse the air to pass “down into the top part of the vessel A, and thence np through the hot-air cylinder and its chimneys.” We are of opinion that the first claim of the plaintiff’s patent must be confined to the use of a perforated top-plate to the cylinder having the functions and anode of operation set forth in the specification, and, that, as the defendants do not have such a perforated top-plate, or any equivalent for it, they do not infringe. Decree affirmed.